DIY Parabolic lights Installation Guide

[ben205vs]

Yes..

You only ground one wire on each headlight PLUG, grounding this wire will allow them to function normally.

Ok so I cut the red wire on each plug, earth out the wire that is on the plug side and tape up the other end? (Wire on the loom side). If so, that doesn't seem so bad.

[peaandham]

Exactly, so two wires from the connector will will still go to the factory loom, but the third wire from the connector will be grounded somewhere.

[ben205vs]

Exactly, so two wires from the connector will will still go to the factory loom, but the third wire from the connector will be grounded somewhere.

Thanks very much mate, worked perfect. I stupidly cut the wrong wire on one of the headlights and was wondering why I couldn't get it to work. But once I figured that out it was all good.

[InsaneMcFries]

Do KE/KF/KH one piece paras fit into a TJ magna? It's probably a stupid question.

[M4DDOG]

Do KE/KF/KH one piece paras fit into a TJ magna? It's probably a stupid question.

KE/KF/KH are 2 piece paras, and yes both 1 & 2 piece paras fit a TJ magna.

[Callumfe]

Hey just put the pure red work to the ground and the high beam come on ??

[Jamesportz]

Thumbs up to this thread.

[mafew]

Hey, sorry to revive an old thread but does anyone have any photos of the parker mod in the paras??
Please and thank you.